Clearance!
Features
Brand | Siser |
---|---|
SKU | VN-HG-Y-20 |
Vinyl Application | Heat Applied |
Vinyl Type | Holographic |
Finish | Glossy |
Transfer Vinyl Max Colors | Layering not recommended |
CPSIA Certified | Yes |
Home Iron Compatible | Yes |
Transfer Vinyl Ideal Applications | 100% Cotton, Cotton/Poly Blends, Leather, 100% Polyester |
Vinyl Thickness | 4.3 mils |
Features
- Pearl is a translucent color and will darken when applied to darker color fabrics.
- Width: 19.5" +/- (may vary in size) Pearl Holographic is 17.5" +/- (may vary in size)
- Length: By the yard.
- Carrier: Pressure sensitive backing.
- Please note that Holographic is a unique product, and that cracking and delamination may occur after washing.
Maintenance
- Do not dry clean.
- Machine wash COLD / mild detergent.
- Dry at normal setting.
- No chlorine bleach.
- Turn garment inside out.
- Wait 24 hours before first wash.
Resources
Siser Holographic Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester, Leather
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 320°F/160°C
- Use medium pressure for 15-20 seconds
- Peel carrier cold
- Wait 24 hours before first wash.
Siser Holographic Home Iron Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheetand re-press for 5-10 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser Holographic Vinyl Cutter Settings
Brother Cutter Settings
- Blade: 2
- Cut Speed: 1
- Cut Pressure: 3
Brother Scan N Cut DX Cutter Settings
- Blade: 3
- Cut Speed: 5
- Cut Pressure: 5
Cricut Cutter Settings
- Blade: Standard
- Setting: Light Cardstock
Galaxy Cutter Settings
- Blade: 45°/60°
- Gram Force: 75-80
- Speed: 300mm/s
- *Blade Advancing Varies
GCC Cutter Settings
- Blade: 45°
- Gram Force: 180-190
- Offset: .250
- Speed: 30 cm/s
Graphtec Cutter Settings
- Blade: 45°
- Gram Force: 17-18
- Tool: CB09U+0
- Speed: 30 cm/s
Juliet/Romeo Cutter Settings
- Blade: Juliet 45°
- Force: 5-10
- Offset: 0.250
- Speed: 10
Roland Cutter Settings
- Blade: 45°
- Gram Force: 180-190
- Offset: .250
- Speed: 30 cm/s
Silhouette Cutter Settings
- Blade: Standard, 3
- Setting: Heat Transfer
- Material: Smooth
- Speed: 8
- Thickness: 14
Write Your Own Review