What happens when you take the smooth glitter finish of VideoFlex Glitter and combine it with the easy-to-weed carrier of EasyWeed®? The answer is Sparkle. Sparkle contains a mix of embedded colored and silver glitter flakes and Sparkle comes on a pressure-sensitive backing to make weeding a breeze!
Price Per Yard (per color)
1-4
$9.99
5-9
$7.59
10-49
$7.39
50+
$6.59
Features
| Brand | Siser |
|---|---|
| SKU | VN-SP-Y-12 |
| Vinyl Application | Heat Applied |
| Vinyl Type | Sparkle |
| Finish | Glitter |
| Transfer Vinyl Max Colors | Layerable |
| CPSIA Certified | Yes |
| Home Iron Compatible | Yes |
| Transfer Vinyl Ideal Applications | 100% Cotton, Cotton/Poly Blends, 100% Polyester |
| Vinyl Thickness | 4.7 mils |
Features
- Width: 11.5" +/- (may vary in size)
- Length: By the yard.
- Carrier: Pressure sensitive backing.
Maintenance
- Do not dry clean.
- Machine wash warm or cold/ mild detergent.
- Dry at normal setting.
- No chlorine bleach.
- Wait 24 hours before first wash.
Resources
Siser Sparkle Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester.
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 10-15 seconds
- Peel carrier hot
- Wait 24 hours before first wash.
Siser Sparkle Home Iron Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheetand re-press for 5-10 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser Sparkle Vinyl Cutter Settings
Cricut Cutter Settings
- Blade: Standard
- Setting: Iron-on
Brother Scan N Cut DX Cutter Settings
- Blade: 3
- Cut Speed: 5
- Half Cut: 5
Graphtec Cutter Settings
- Blade: 45°
- Force: 8-9
- Tool: CB09+0
- Speed: 30cm/s
Juliet/Romeo Cutter Settings
- Blade: Juliet 45°
- Force: 5-10
- Offset: 0.250
- Speed: 10
Roland Cutter Settings
- Blade: 45°
- Gram Force: 80-90Off
- Set: .250
- Speed: 25-50 cm/s
Scan n Cut Cutter Settings
- Blade: Standard, 2
- Cut Speed: 1
- Cut Pressure: 1
Silhouette Cutter Settings
- Blade: Standard, 2
- Material: Heat Transfer, Smooth
- Speed: 8
- Force: 4
Write Your Own Review