Sparkleberry Ink Heat Transfer vinyl is the decorative element your garment has been waiting for! Bright, artistic patterns will stand out and can be easily complemented with solid or glitter heat transfer vinyl. Sold by the 12" x 12" sheet. Sparkleberry Ink Heat Transfer vinyl requires the use of Siser TTD High Tack Mask for application.
Features
| Brand | Sparkleberry Ink |
|---|---|
| SKU | VN-SBI-HTV-S-12 |
| Vinyl Application | Heat Applied |
| Vinyl Type | Sparkleberry Ink |
| Finish | Semi Gloss |
| Transfer Vinyl Max Colors | Layering not recommended |
| CPSIA Certified | Yes |
| Home Iron Compatible | Yes |
| Transfer Vinyl Ideal Applications | 100% Cotton, Cotton/Poly Blends, Leather, 100% Polyester |
| Vinyl Thickness | 5.3 mils |
Sparkleberry Ink Heat Transfer Vinyl Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester, Leather
- Cut material – don’t mirror!
- Weed excess material
- Mask with Siser TTD High Tack Mask
- Preheat garment for 2-3 seconds
- Place the design pattern side up on your garment.
- Cover design with kraft paper or heat transfer cover sheet
- Apply design at 305°f/150°c
- Use medium pressure for 10-15 seconds
- Peel carrier hot or cold
Sparkleberry Vinyl Home Iron Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheetand re-press for 5-10 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Sparkleberry Vinyl Cutter Settings
Brother Cutter Settings
- Blade: 2
- Cut Speed: 1
- Cut Pressure: 1
Cricut Cutter Settings
- Blade: Standard
- Setting: Iron-on
Galaxy Cutter Settings
- Blade: 45°/60°
- Gram Force: 60-65
- Speed: 300mm/s
- *Blade Advancing Varies
Roland Cutter Settings
- Blade: 45°
- Force: 80g-90g
- Speed: 25-50 cm/s
Silhouette Cutter Settings
- Blade: Standard, 2
- Material: Heat Transfer, Smooth
- Speed: 4
- Force: 8/s
Write Your Own Review