Customer Reviews
Cart: 0 Item(s): $0.00

Lasersoft Ez Peel Transfer Paper 8.5X11

Lasersoft Ez Peel Transfer Paper 8.5X11

At last a technological breakthrough has transpired, giving the garment industry a digital, high quality, SOFT solution for laser transfers. This "shift" in technology allows the toner to absorb into the surface coating of the paper. The coating acts to shield and later bond the inks to the fabric fibers, all without using a plastic film. This is where the distinction lies. These advancements allow for the softest hand possible because the inks and coatings are bonded to the actual fibers. This is the only laser transfer available today which can make this claim.

More product details…
Printer Type:
Color Laser
8.5" X 11"
Garment Color:
Item #:
Review to get 200 PW Reward Points (Up to 600 Points)

Availability: In stock

1-49 50-99 100-999 1000+
$0.80 $0.65 $0.60 $0.50

or Clear Form
  • Details
  • Instructions
  • Videos
  • Reviews
  • Product Details

    Since there are so many makes and models of printers it is virtually impossible to guarantee the results on any one printer. We can only suggest that you check with the manufacturer regarding the use of transfer papers. We cannot assume any liability for the use of our transfer papers. Learn More...

    • Vibrant, durable and "natural" looking
    • No plastic sheen
    • Stretches and Breathes
    • No splitting, cracking, peeling, or separating from your garment
    • Best on light colored 100% cotton or 50/50 cotton/poly blends
    • Use as hot or warm peel

  • Lasersoft Easy Peel Transfer Paper Application Instructions

    General Use

    For light colored garments only, Designed for both fuser oil and oil-less laser printers and copiers.

    Application Instructions

    1. Design or select your image on the computer.
    2. Print the image in reverse/mirrored format using a heavy paper mode.
    3. Set heat press at 375 degrees with medium-heavy pressure.
    4. Pre-heat garment for 10-15 seconds to remove moisture.
    5. Place transfer face down and press for 25 seconds.
    6. For best results leave on the heat press, wait 10-15 seconds and then peel the paper in a smooth even motion.
    7. To improve the feel or 'hand', stretch the garment in all directions while still hot.

    Tips & Notes

    • Manufacturer and seller are not responsible for damaged caused by misuse of this paper.
  • Print On Light Shirts With Laser Printers
  • Customer Reviews

    Rate or review to get 200 PW Reward Points(What is this?)
    Leaves a ring around the image Review by Sheila Robinson
    Luckily we do practice runs on new paper. This was not a success. We did 4 prints to make sure we did it all right. The image itself looks really good but where the paper ends, you can tell and it makes the transfer look cheap.
    So I would have to give this product a low rating. (my first low rating. we love Proworld products though.) Always shop Proworld! (Posted on 11/12/17)
    Good Print Review by Bettina Barnes
    This was a good quality product. Once you get your settings right on your press, you should be good to go. (Posted on 11/10/17)
    Excellent Laserjet Transfer paper Review by Rachelle Lopez
    Would totally buy again and recommend to others. (Posted on 10/19/17)
    Show More