CLEARANCE SALE   Huge savings up to 70%    SHOP NOW >

Texprint Sublimation Paper on 20oz Skinny Tumbler with a 3D Vacuum Heat Press

Application Instructions

  1. Turn the 3D Vacuum Heat press on.
  2. Set the heating button so both the top and bottom heating lights are on. (2 red lights will be showing)
  3. Set the Temperature to 338 degrees F (170 degrees C) and time to 360 seconds (6 minutes).
  4. Print a mirror image onto Texprint Paper.
  5. Trim the edges of the image and wrap around the tumbler.
  6. Attach the image to tumbler using transfer release tape.
  7. Wrap tumbler with the skinny tumbler wrap.
  8. Place the tumbler on its side within the press.
  9. Press vacuum button
  10. Press the time button
  11. Remove immediately once finished and peel hot. Use caution as the tumbler will be very hot.