Free Shipping Offer >
Toggle Nav
Cart
  • Favorites
    • Products
    Account
    Help
  • Help
    • 10% OFF SUBLIMATION BLANKS    No coupon needed. Exclusions apply.    SHOP NOW >
    $14,995.00

    Unleash Revolutionary UV Printing Excellence: The Aries 113 is more than just a UV printer—it's an all-in-one solution with a built-in laminator; a game-changer in the realm of direct-to-film printing. This technological marvel redefines the benchmarks for performance and reliability. Set your print job in the morning, and by the evening, your finished film awaits, with minimal need for operator involvement.

    What Makes The Aries 113 So Great?

    • Compact and Cost-Effective Workhorse Printer
    • Automated Head Maintenance and Care
    • Hands-Free Operation: Set your print job in the morning, and by day's end, your completed film is ready, requiring minimal operator involvement.
    • Streamlined and Space-Efficient Design: Compact, all-in-one printer with a built-in laminator effortlessly blends style and functionality, ensuring it harmonizes with any workspace.
    • Auto-Stop: Stops printing when users open the front cover for regulation and safety purposes.
    • Key Locked Back End: Enhances security at all easy-access cover panels at the back of printer.
    • Seamless Media Management: Eliminate the hassle of manual laminator pressure adjustments with our automated system!
    • Accessible Design: Intuitive, labeled board design and connections for easy access and repair.

    Aries 113 Requires On-Site Training (not included)

    • Option 1 - On-Site Setup/Training + Driving Distance: One time driving distance within 2 hours (of Buena Park, CA, 90621), 4~6 training hours onsite, and lifetime virtual training
    • Option 2 - On-Site Setup/Training + Air Travel Domestic: One time accommodations such as hotel, rental car, flight ticket and 4-8 training hours onsite.

    NOTE: DTF equipment should be used in a well-ventilated area with a filtration system. We recommend using a fume extractor to handle the fumes caused by powder curing and a ventilator for filtering DTF powder if it becomes airborne due to handling. Protective gear such as gloves, safety goggles and/or smocks or aprons should be used to maintain the safety of the user. DTF inks and films require a good humidity environment - over 50% humidity is strongly advised to reduce the risk of ink clogs and film buckling. The use of DTF equipment, chemicals, powders, inks, and all accessories is at the user's risk.

    This item will ship by freight truck from the manufacturer. A $500.00 shipping charge will be added at checkout. Allow additional time for shipping.

    Add to Favorites

    ARIES 113 UV DTF PRINTER

    Be the first to review this product
    item #
    DTFST-PR-AR113
    main product photo
    Features
    More Information
    Brand DTF Station
    SKU DTFST-PR-AR113
    DTF Maximum Media Width 13"
    Machine Dimensions 31.29" x 12.99" x 17.40"
    Voltage 110
    Included
    • DigiRip Software (download below)
    • Limited to 1-year warranty on non-consumable parts and limited 6 month warranty on the printhead up to 2 printheads*.
    • AC Power Cable
    • Ethernet Cable
    • USB Flash Drive (Installation & Informational Materials)
    • Paper Core (Cylindrical tubes) x 2
    • Metal Clips x2
    • Plastic Squeegee
    • Spare Parts/Consumables: Dampers x8, Syringes x6, Print head cable x2, 1 Meter Ink tube x1, Ink tube connectors x10, Disposable vinyl glove x3, Extra Screws of different sizes, Ink Tube Splitter x2
    • Informational Materials: Quick Start Guide, Maintenance Chart, User Manual, Initial Parameter Settings
      • *Must complete Onsite Training/Installation.
    Features
    • Speed: 6 pass: 2.5-3.53 m²/hr • 8 pass: 1.5-2.0 m²/h
    • White Ink Management System (WIMS): Timed white ink stirring system to circulate and maintain white ink inside the printer.
    • Semi-Auto Laminator Pressure Control: Even pressure for bonding A and B films with a single lever.
    • Passive Auto-Cleaning: When the printer is left on, it will automatically maintain and clean the printhead every 4 hours.
    • Active Auto-Cleaning: During set intervals (even during printing), the printer can stop to clean the printhead.
    • Head Strike Sensor: Helps prevent damage to the printhead.
    • Auto Ink Alert System: Informs the user when ink is running low.
    • Media Take-Up System: Automatically winds all the prints in a roll.
    Specifications
    • Print Head: Dual Epson XP600 (2)
    • Software: DigiRIP RIP Software
    • Max Film Width: 12.60” (32cm)
    • Max Print Width: 11.81” (30cm)
    • Printing Speed: 6 pass: 2.5-3.53 m²/hr • 8 pass: 1.5-2.0 m²/h
    • Daily Output (8 hours): 500 pcs (4"x4" design size)
    • Weight (lbs): Product: 88.18 lb • Packaging: 132.27 lb
    • Dimensions (WxDxH): Product: 31.29" x 12.99" x 17.40" • Packaging: 33.46" x 19.29" x 25.55"
    • Power Requirements: 500W / 110V / 4.54A
    Color Prime UV Ink Specifications
    • Size: 1kg
    • Colors: CMYKW + Varnish
    • Download The Color Prime UV Ink Safety Data Sheet.
    Get The DigiRIP Software

    Click for the DigiRIP Trial Version (15 Day) - Windows Only - License to activate software will be sent after purchase.


    Applications
    • Signage and Banners: Various sign materials, such as PVC, acrylic, foam board, and corrugated plastic (suitable for short-term outdoor and indoor signage).
    • Promotional Items: Personalize and brand promotional products like pens, keychains, USB drives, and phone cases.
    • Packaging: Materials like cartons, boxes, and labels, offering customization and branding options for businesses.
    • Labels and Stickers: Durable labels and stickers for product labeling, barcoding, or branding purposes.
    • Glass and Ceramics: Decorative glassware, drinkware, ceramic tiles, and more.
    • Wood and Plywood: Wooden surfaces, creating custom furniture, signage, and art on wood.
    • Metal: Aluminum, brass, and stainless steel, and personalized metal products.
    • Leather and Leather Products: customized leather goods, including wallets, bags, and footwear.
    • 3D Objects: Prototypes and custom packaging for unique-shaped items.
    • Flooring and Tiles: Custom designs tiles and other flooring materials.
    Resources
    Write Your Own Review
    Only registered users can write reviews. Please Sign in or create an account

    You may also like